Strip heaters, often considered component heaters, are a simple way of using surface area to transfer heat effectively. Steel strip heaters are an excellent heat transfer product and can be easily controlled by using either mechanical thermostat not cost effective bimetal thermostats that can be installed on the surface you are heating. Mounting holes are useful to mount the heaters securely on almost any surface with terminal extending from the sheath for easy electrical connections. Many users also request lead wires that extend from one end that make the installation more flexible as the temperature controller is easily adaptable to this configuration.
Temperatures reach as high as 500 degrees F and use the high quality magnesium oxide that is used in tubular elements that allow for effective heat transfer.
A fairly inexpensive way of heating surfaces or small areas, strip heaters are an excellent solution to meet any budget.
Strip heaters are composed of a heating element, a protective sleeve or sheath, and mounting hardware.
EHK GROUP can supply and custom made the steatite ceramic Band Heating products according to customer's drawings, samples and performance requirement.
Euroheaters mica strip heaters provide rapid heat transfer to cites. tanks. sealing machines. hot plates or other equipment possessing flat Surfaces. The construction of rnica strip heaters is closely identical to the mica band heaters listed separately in this catalog.
Euroheaters mica strip heaters provide rapid heat transfer to cites. tanks. sealing machines. hot plates or other equipment possessing flat Surfaces. The construction of rnica strip heaters is closely identical to the mica band heaters listed separately in this catalog.
Ship heaters when ordered for use in grooved platens, should be ordered with our butt-case construction. Butt-case provides the means to transfer heat efficiently through both surfaces of the heater.
Nicron composed of a resistor wound on a mica sheet by sheet and asylee similar on both sides which have a high dielectric insulation and excellent thermal conductivity, has a metallic shielding plate 316 grade stainless steel and an adjustment system in the form of adjustment holes for bolts embedded.
The electrical terminals can be as steely bolts, blade-style iron, porcelain terminal block or cable Nickel - Steel with contact protection box.
Wattage should be maintained below 35 W/sq. in. When surface mounted. mica strip heaters should not exceed 22 W/sq. in. Proper clamping and application of strip heaters will provide long life and efficiency. while the most cost effective heater available.
Model 01
Model 02
Model 03
Model 04